User Manual

23
21. Select “Power Mode” to indicate if you would like to select “Continuous Access Mode” to
continue to have the device on without any power saving. To select “Fast Power Save” so
the device will remain the speed of the network while perform the power saving.
“Maximum Power Save” allows the device in stand by mode and wakes whenever there’s
a signal being detected.
21. Click on “Privacy Filter” to select if you would like to “Accept All Packets” which means
the device will accept any data that is coming from the network. In “Filtering Mode” means
the device will filter out any unnecessary packets from the network.
20. RTS Threshold: The value should remain on its default setting 2432 bytes. If you encounter
any date flow, only minor modifications are recommended.