User Manual

28
Auto Switch authentication is the default authentication algorithm.
11. Select “Desired BSS Type” and set up the value: “Ad-hoc”, “Any ” or Infrastructure”.
An Ad-Hoc wireless LAN is a group of computers each with LAN adapters, connected as an
independent wireless LAN. An integrated wireless and wired LAN is called an Infrastructure
configuration.
12. Select “Channel” from the list, and choose a “Value” from the drop down list. FCC
regulations require a “Value” between 1 and 11.
13. Select “Desired SSID” and create the network name that matches the existing one or starting a
new one. The SSID can have any value, but should have the same value as the Access Point. In
Ad-Hoc mode, all clients should share the same SSID.