User Manual
19
6. Windows
®
2000 will automatically scan the driver. After acknowledge of Windows
®
2000,
please click "Next".
7. Windows
®
2000 will install the driver. As the driver files are being copied to the Access
Point appropriate location. Then Windows
®
2000 will show a windows information dialog.
Click “ Finish” .
8. Please right click “My Computer” select “Properties”, click on “Hardware” tab and select
“Device Manager”, double click “Network Adapters” then select “TI ACX100 WLAN
Adapter”.
9. From the menu, please select “ Advanced” tab. First, Select “ Authentication Mode” and
set up either “Auto Switch”, “Open Authentication” or “Shared Authentication”.