User Manual

21
12. Select “Desired SSID” and create the network name that matches the existing one or
starting a new one. The SSID can have any value, but should have the same value as the
Access Point. In Ad-Hoc mode, all clients should share the same SSID.
SSID ─ In infrastructure association, the stations will link to the AP with the same ESSID
as they have.
13. Select “Desired Tx Rate” and set up a default value: The selections are “Auto”, “2Mbps”,
“5.5Mbps”, “11Mbps” or “22 Mbps”. The default is set to “Auto” so the device will perform
auto fall back to justify the actual through put of the network.