User's Manual

802.1x: Check it to enable the 802.1x authentication protocol.

Encryption Key (Hex): When security type is WEP, this is enabled. You can

define up to 4 sets. At least one key must be defined.

3.5 Current Statistics

This screen graphically displays the received and sent traffic rates of the wireless

USB adapter. The graphs sample time is definable by users in the preference option.

Signal Strength: Shows the received signal strength

SNR: the ratio of the signal strength and the noise.

Network Rate: Shows the data rate ranging from 1 Mbps to 54 Mbps.

Received: Shows the current Rx Rate (measured in Kbytes/sec)

Sent: Shows the current Tx Rate (measured in Kbytes/sec)