54Mbps Wireless Network Mini PCI Adapter USER’S MANUAL Model Name: Version: Date: GL2554MP-1A 1.
Please make sure TURN OFF your computer and remove the power cord from your PC. Open the computer case and then please insert the 54Mbps Wireless mini PCI Adapter. Once the 54Mbps Wireless mini PCI Adapter is installed, place the computer case back. Turn ON your computer. Driver Installation 1. Please select the second option and click “Next”. 2.
. Please click “Finish” 4. To make sure if the installation is successful, you could check it through the device management.
5. Once the installation is successful, a utility program icon will show on your desktop. To lunch the utility, just double click the icon.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The antenna should be integral if the end device is intended to be operated in 5.15 ~ 5.25GHz frequency range. As long as 2 conditions above are met, further transmitter test will not be required.
Global Sun Technology Inc.
Step 1 Take the Mini PCI card top connector for aux antenna connector for Main antenna bottom
Card Slot connecting with the bottom of the Mini PCI Card Right clip Left Clip Main Antennae Aux Antennae
Step 2 Insert the Mini PCI card into the card slot with downside toward the slot Top side bottom side
Step 3 Press down the top upperside of the card doward.
Step 4. Connecting the main antenna to the main connector.
Step 5 Connecting aux antennae to the aux connector. When both antennae are connected to the connectors as the picture shown below, the Mini PCI Card installation is completed.
Notification on Antennae Please be notice that the antennae must be firmly located inside the TFT-LCD panel.
