User's Manual

6. INSTRUCTIONS
GL2BHS80 Headset has dual pairing function (patent protected). Dual pairing
functions means that the headset is able to listen to incoming calls from 2
different cell phones. This user guide will instruct you how to set up a
dual-paired function, switch connections and answer phone call from different
devices.
6.1 To turn the headset on
 Press and hold the call handling button (Θ) around 1second until Function
LED flashes green.
 Then Function LED flashes GREEN every 5 seconds, this means the
headset has been turned on and you are ready to answer incoming calls.
 If Function LED flashes RED every 7 seconds, this means low battery,
please recharge the battery.
 If Function LED flashes RED every 3 seconds, this means the headset
have not be paired yet, you need to pair the headset with audio gateway
device first.
 If Function LED flashes GREEN every 5 seconds, this means the headset
automatically connect with the paired devices and ready to answer
incoming calls.
6.2 To turn the headset off
 Press and hold the call handling button (Θ) around 7 seconds until you
hear a long beep tune and Function LED lights off. This means the
headset is turned off, and you are unable to answer any call.
6.3 Pairing the headset
Before you can use the headset, you must pair it with the audio gateway
devices (such as mobile phone) you want to use it with. Once you have
paired the headset with the audio gateway device, you do not need to pair
again until you want to use this headset with another phone.
The headset will automatically register the audio gateway device into memory,
you do not need to pair again even the headset is turned of and turned on next
time.
5