User's Manual

Dual-pairing functions
The GST headset is enable for dual-pairing, which means that your headset
can be paired with 2 different devices, for example, one mobile phone, and one
GST voice/data Access Point. After the headset has been paired
successfully, the headset will manual switch connection from one device to the
other.
6.3.1 Pairing
1. The headset uses volume up button and volume down button to accept
pairing requests from 2 different devices.
2. After you turn the headset on, the Function LED flashes RED every 3
seconds, this means the headset is ready for pairing and you may start
pairing procedure directly. Function LED will flashed RED until the
headset has been paired or turned off.
3. Volume down button is default set as a paired key.
4. Continue according to the instructions in the pairing devices’ user
documentation. The headset passkey is 0000.
5. When pairing success, Function LED flashes GREEN every 5 seconds. If
Function LED flashes RED every 3 seconds, means pairing failed. You
need to re-pairing again.
6. If you want to have your headset to be paired with 2
nd
device. Press and
hold the volume up button 7 seconds until you hear 2 long beep tune and
headset is turn off. Press call handling button (Θ) around 1 second, the
headset is turned on again, then you will see the Function LED flashes
RED every 3 seconds, the headset is now ready to be paired with another
device. The pairing procedure is same as the first pairing procedure.
6.3.2 Resetting the headset to be paired to another audio gateway device
You may want to reset the headset to be paired with from one audio gateway
device to the other.
 With the headset turned on, press and hold Volume Up button (or volume
down button) around 7 seconds, until you hear 2 long beep tune, the
headset will be turn off. Then press call handling button (Θ) around 1
second to restart the headset. When Function LED flashes every 3
seconds, means the headset already clear pairing. Then you can pair
the new device again.
6