Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 54Mbps wireless Network Pocket Access Point USER MANUAL Marketing Dept. Editorial: Jessica Yang Approved By: 54Mbps Wireless Network Pocket Access Point DOCUMENT USER MANUAL GST Confidential 1 REV. 1.3 REV.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Version History Version H/W Description Date Editor V1.0 Aris Create the file 20 July. 2004 George Chou V1.1 Aris Modify the UI and change 29 July. 2004 the default for Client George Chou V1.2 Aris Create AP mode function 17 Aug. 2004 Jessica Yang explanation and delete function V1.3 Aris Add Certification Note! GST Confidential 2 06 Sep.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Contents 1. Overview ....................................................................................................5 1.1 Product Feature ................................................................................5 1.2 System Requirements ......................................................................5 1.3 How to switch within 3 modes...........................................................5 2.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.1 7.2 7.3 7.4 7.5 7.6 LAN Setting ....................................................................................47 7.1.1 LAN & DHCP Server ............................................................47 7.1.2 WAN.....................................................................................48 7.1.3 Password .............................................................................49 7.1.4 Time ............
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 1. Overview 1.1 Product Feature ● ● ● ● ● ● ● 3-in-1 function build-in with easily accessible hot-key switch, including Access Point, Access Point Client and Wireless Router. It’s also the smallest networking device in the market. Low power consumption , and support USB power adapter which provides the best mobility. Compliance with IEEE 802.11g and 802.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 2. Getting Start with Access Point 2.1 Know the 54Mbps Wireless Network Access Point Ports: ● Power Receptor ● Reset Button ● RJ-45 Ethernet Port Cross-over cable is required to connect to computer directly LEDs: ● Power LED: ON when the unit is powered up ● ● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity WLAN LED: ON indicates WLAN is working; BLINK indicates wireless activity. 2.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 1. A broadband Internet connection. 2. ADSL or Cable modem provided by ISP as part of the broadband connection installation. 3. A Router that connects to the ADSL/Cable modem for Internet connection sharing. 4. An Access Point to connect with the Router to form a wireless infrastructure network. 5. Wireless clients equipped with wireless networking devices such as wireless PC Card for wireless connection. 2.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Now, the main menu screen is popup.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 2.3.2 Setup with Wizard Setup wizard is provided as the part of the web configuration utility. User can simply follow the step-by-step process to get Access Point configuration ready to run in 4 easy steps by clicking on the “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue. Step 1: Set Password User can change the password and then click “Next” to continue.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Step2: Set WLAN Connection Please type the name of SSID and select the channel. continue. Then, click “Next” to Step 3: Set Wireless LAN Connection If user doesn’t want to use “default” as the SSID, user can change SSID here. User can also choose different channel to avoid noise coming from other wireless networking devices. Please click “Next” to continue.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Step 4: Set WEP Encryption If user wants to enable WEP, please click “Enabled”. Then, select the key size of WEP encryption and enter the key value in the key text box. Please click “Next” to continue. Step 5: Restart The Setup wizard is now completed. The new settings will be effective after the Access Point restarted. Please click “Restart” to reboot the Access Point.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 3. Configuration Access Point through WEB Browser 3.1 Status This page as below shows the following information. Firmware Version: Shows the current firmware version. LAN: Shows the Mac address, IP address (default: 192.168.1.1), Subnet Mask, Gateway Address. The current LAN traffic calculated in terms of number of packets sent and received by AP through wired connection is also displayed.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 User may clear the entries recorded in the log by clicking the “Clear Log” button, and refresh the screen to show the latest log entries by clicking the “Refresh” button.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 3.2 Basic Setting This is the page allow user to change the access point settings. AP Name: The name of the AP, which can be used to identify the Access Point among the all the Access Points in the wireless network. SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a wireless network. The SSID must be identical for each clients and nodes in the wireless network.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 selected, the key value must be entered in ASCII or HEX format. Note: When WEP security is enabled, all the wireless clients that wish to connect to the Access Point must also have WEP enabled with the identical WEP Key value entered. Apply: For the changes made to any of the items above to be effective, click “Apply”. The new settings are now been saved to Access Point and will be effective once the Access Point restarts.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 3.3 IP Setting This page allows user to configure the IP and DHCP settings of the Access Point. The default IP address of this access point is 192.168.1.1 with the subnet mask of 255.255.255.0. User can type in other values for IP Address, Subnet Mask and Gateway and click “Apply” button for the changes to be effective. User can also set the Access Point to obtain the IP from a DHCP server, but it is not recommended.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Click “Apply” for the changes to be effective. DNS server: If User’s local Ethernet support DNS function, user can fix the DNS address in the space. 3.4 Advanced Setting This page contains configurations for advanced users, which the change reflects the wireless performance and operating modes. AP – The normal Access Point operating mode which forms a wireless ESS network with its wireless clients.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the access point has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM interval value. Access point clients hear the beacons and awaken to receive the broadcast and multicast messages.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 3.5 Security This page is where user configures the security features supported by this Access Point. Password: Allow user to change the new login password. Here are the necessary steps: 1. Enter the new password in the “AP Password New:” field. 2. Enter the new password again in the “Confirm” field. 3.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 browse through the MAC address saved by selecting the drop-down box. For any changes made in the security page, click “Apply” for the changes to be effective. 3.6 Tools Four functions are provided in this page, Backup, Restore Settings, Restore default settings and Firmware Upgrade.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 box, where gets to select the firmware file, which download from the web for the latest version. Upon selecting the firmware file, click “Upgrade” and complete the firmware upgrade process when the Access Point re-operates after it restarts.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 4. Getting Start with Wireless Ethernet Adapter 4.1 Know the Wireless Ethernet Adapter Ports: ● Power Receptor ● Reset Button ● RJ-45 Ethernet Port Cross-over cable is required to connect to computer directly LEDs: ● Power LED: ON when the unit is powered up ● LAN LED: ON indicates LAN connection; BLINK indicates LAN activity ● WLAN LED: ON indicates WLAN is working; BLINK indicates wireless activity. 4.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Ad-Hoc Mode: 4.2.1 Access the Setting Menu User could start to access the configuration menu anytime by opening a web browser window by typing the IP address of this access point. The default IP is 192.168.1.50. The below window will popup. Please enter the user name and password. Both of the default is “admin”.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Now, the main menu screen is popup.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 4.2.2 Setup with Wizard Setup wizard is provided as the part of the web configuration utility. User can simply follow the step-by-step process to get Access Point configuration ready to run in 4 easy steps by clicking on the “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue. Step 1: Set Password User can change the password and then click “Next” to continue.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Step2: Set WLAN Connection Please type the name of SSID and select the channel. Click “Next” to continue. Step 3: Set Wireless LAN Connection IF user doesn’t want to use “default” as the SSID, user can change SSID here. Also user can choose different channel to avoid noise coming from other wireless networking devices. Please click “Next” to continue.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Step 4: Set WEP Encryption If user wants to enable WEP, please click “Enabled”. Then, select the key size of WEP encryption and enter the key value in the key text box. Click “Next” to continue. Step 5: Restart The Setup wizard is now completed. The new settings will be effective after the Access Point restarted. Please click “Restart” to reboot the Access Point.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 5. Configuration Wireless Ethernet Adapter through WEB Browser 5.1 Status This page as below shows the following information. Firmware Version: Shows the current firmware version. LAN: Shows the Mac address, IP address (default: 192.168.1.50), Subnet Mask, Gateway Address. The current LAN traffic calculated in terms of number of packets sent and received by AP through wired connection is also displayed.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 User may clear the entries recorded in the log by clicking the “Clear Log” button, and refresh the screen to show the latest log entries by clicking “Refresh” button.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 5.2 Basic Setting This is the page allow to change the settings of access point. AP Name: The name of the AP, which can be used to identify the Access Point among the all the Access Points in the wireless network. SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a wireless network. The SSID must be identical for each clients and nodes in the wireless network.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 selected, the key value must be entered in ASCII or HEX format. Note: When WEP security is enabled, all the wireless clients that wish to connect to the Access Point must also have WEP enabled with the identical WEP Key value entered. Apply: For the changes made to any of the items above to be effective, click “Apply”. The new settings are now been saved to Access Point and will be effective once the Access Point restarts.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 5.3 IP Setting This page allows users to configure the IP and DHCP settings of the Access Point. The default IP address of this Wireless Ethernet Adapter is 192.168.1.50 with the subnet mask of 255.255.255.0. User can type in other values for IP Address, Subnet Mask and Gateway and click “Apply” button for the changes to be effective.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 5.4 Advanced Setting This page contains configurations for advanced users, which the change reflects the wireless performance and operating modes. Beacon Interval: To set the period of time in milliseconds that AP sends out a beacon. Default is 100 milliseconds. RTS Threshold: To set the size of RTS/CTS packet size. Default is 2432 bytes.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 preambles and headers are defined: the mandatory supported Long Preamble and header, which interoperates with the 1 Mbit/s and 2 Mbit/s DSSS specification (as described in IEEE Std 802.11), and an optional Short Preamble and header (as described in IEEE Std 802.11b). At the receiver, the Preamble and header are processed to aid in demodulation and delivery of the PSDU.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 steps: 1. Enter the new password in the “AP Password New:” field. 2. Enter the new password again in the “Confirm” field. 3.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 5.6 Tools Four functions are provided in this page, Backup, Restore Settings, Restore default settings and Firmware Upgrade. Backup Settings: Click on “Backup” button, which will open a FileSave Dialog box, where gets to save all the current settings and configurations to a file.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 6. Getting Start with Wireless Router 6.1 Know the 802.11g Wireless Router Ports: ● Power Receptor ● Reset Button ● RJ-45 Ethernet Port Cross-over cable is required to connect to computer directly ● There is no visual LAN port for Pocket AP.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Now, the main menu screen is popup.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 6.2.2 Quick Setup with Wizard Setup wizard is provided as the part of the web configuration utility. User can simply follow the step-by-step process to get wireless router configuration ready to run in 6 easy steps by clicking on the “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue. Step 1: Set new Password User can change the password and then click “Next” to continue.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Step2: Choose time zone Select properly time zone from the drop down list. continue. Please click “Next” to Step 3: Set LAN connection and DHCP server Set IP address and mask. The default IP is 192.168.1.1. If user likes to enable DHCP, please click “Enabled”. DHCP enabled is able to automatically assign IP addresses. Please assign the range of IP addresses in the fields of “Range start” and “Range end”.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Step 4: Set Internet connection Select how the router will set up the Internet connection: Obtained IP automatically; Fixed IP address; PPPoE to obtain IP automatically; PPPoE with a fixed IP address; PPTP. Obtain IP automatically (DHCP client): If user wants to enabled DHCP server, choose "Obtain IP automatically (DHCP client)" to have the router assign IP addresses automatically.
Product: IEEE 802.
Product: IEEE 802.
Product: IEEE 802.
Product: IEEE 802.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Step 5: Set Wireless LAN connection Click “enable” to enable wireless LAN. If user enables the wireless LAN, type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router. Step 6: Restart The Setup wizard is now completed. The new settings will be effective after the Wireless router restarted.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7. Configuration Wireless Router through WEB Browser 7.1 LAN Setting The screen leads to configure the LAN & DHCP Server, set WAN parameters, create Administrator and User passwords, and set the local time, time zone, and dynamic DNS. 7.1.1 LAN & DHCP Server This page enables to set LAN and DHCP properties, such as the host name, IP address, subnet mask, and domain name.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 subnet mask is 255.255.255.0. DHCP Server: Enables the DHCP server to allow the router to automatically assign IP addresses to devices connecting to the LAN. DHCP is enabled by default. All DHCP client computers are listed in the table at the bottom of the screen, providing the host name, IP address, and MAC address of the client.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 PPPoE from the drop-down list. WAN IP: Select whether to specify an IP address manually, or DHCP to obtain an IP address automatically. When “Specify IP” is selected, type the IP address, subnet mask, and default gateway in the text boxes. ISP will provide this information. DNS 1/2/3: Type up to three DNS numbers in the text boxes. ISP will provide this information.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.1.4 Time This screen leads to set the time and date for the router's real-time clock, select properly time zone, and enable or disable daylight saving. Local Time: Displays the local time and date. Time Zone: Select properly time zone from the drop-down list. Daylight Saving: Enable or disable daylight saving time. When enabled, select the start and end date for daylight saving time.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.2 Wireless This section leads to set wireless communications parameters for the router's wireless LAN feature. 7.2.1 Basic This page allow to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications. SSID: Type an SSID in the text box.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Shared Key requires the user to set a WEP key to exchange data with other wireless clients that have the same WEP key. This router also supports WPA-PSK. Authentication Type: The authentication type default is set to open system. There are three options: Open System; Shared Key and WPA-PKS. WEP: Enable or Disabled. This is to make WEP enabled or disabled.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 If WPA-PSK is selected, please set the PSK key in the pass phrase field. The length should be 8 characters at least. Note: Once WPA-PSK function enables, it will take some time to make the setting active.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.2.3 Advanced This screen leads to configure advanced wireless functions. Beacon Interval: Type the beacon interval in the text box. User can specify a value from 1 to 1000. The default beacon interval is 100. RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value stabilizes data flow. If data flow is irregular, choose values between 256 and 2432 until data flow is normalized.
Product: IEEE 802.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.3 Status This selection leads to view the status of the router LAN, WAN connections, and view logs and statistics pertaining to connections and packet transfers. 7.3.1 Device Information This screen leads to view the router LAN, Wireless and WAN configuration. Firmware Version: Displays the latest build of the router firmware interface.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.3.2 Log This screen leads to view a running log of router system statistics, events, and activities. The log displays up to 200 entries. Older entries are overwritten by new entries.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.3.3 Log Setting This screen leads to set router logging parameters. SMTP Server: Type the SMTP server address for the email that the log will be sent to in the next field. Send to: Type an email address for the log to be sent to. Click “Email Log Now” to immediately send the current log. Syslog Server: Type the IP address of the Syslog Server if user wants the router to listen and receive incoming Syslog messages.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.3.4 Statistic This screen displays a table that shows the rate of packet transmission via the router LAN and WAN ports (in bytes per second). Click “Reset” to erase all statistics and begin logging statistics again.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.3.5 Wireless This screen leads to view information about wireless devices that are connected to the wireless router. Connected Time: How long the wireless device has been connected to the LAN via the router? MAC Address: Displays the devices wireless LAN interface MAC address.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.4 Routing This selection leads to set how the router forwards data: Static and Dynamic. Routing Table enables user to view the information created by the router that displays the network interconnection topology. 7.4.1 Static It enables user to set parameters by which the router forwards data to its destination if network has a static IP address.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 the page. Update: Select one of the entries in the static IP address table at the bottom of the page and, after changing parameters, click “Update” to confirm the changes. Delete: Select one of the entries in the static IP address table at the bottom of the page and click “Delete” to remove the entry. New: Click “New” to clear the text boxes and add required information to create a new entry. 7.4.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.4.3 Routing Table This screen leads to view the routing table for the router. The routing table is a database created by the router that displays the network interconnection topology. Network Address: Displays the network IP address of the connected node. Network Mask: Displays the network (subnet) mask of the connected node. Gateway Address: Displays the gateway address of the connected node.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.5.1 MAC Filters Allow or deny Internet access to users within the LAN based upon the MAC address of their network interface. Click the radio button next to “Disabled” to disable the MAC filter. Disable: Once the function of MAC filter is disabled, those listed in the MAC Table are allowed Internet access. Enable: All users are allowed Internet access except those users in the MAC Table are deny Internet access.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 remove the user profile. New: Click “New” to erase all fields and enter new information. 7.5.2 Protocol Filter This screen leads to allow and deny access based upon a communications protocol list which has been created. The protocol filter profiles are listed in the table at the bottom of the page. Note: When selecting items in the table at the bottom, click anywhere in the item.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Enable: Click to enable or disable the IP address filter. Range Start: Type the minimum address for the IP range. IP addresses falling between this value and the Range End are not allowed to access the Internet. Range End: Type the minimum address for the IP range. IP addresses falling between this value and the Range Start are not allowed to access the Internet.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Note: When selecting items in the table at the bottom, click anywhere in the item. The line is selected, and the fields automatically load the item's parameters, which user edited. Enable: Click to enable or disable the virtual server. Name: Type a descriptive name for the virtual server. Protocol: Select the protocol (TCP or UDP) used for the virtual server.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.5.5 Special AP This screen leads to specify special applications, such as games, that require multiple connections that are inhibited by NAT. The special applications profiles are listed in the table at the bottom of the page. Note: When selecting items in the table at the bottom, click anywhere in the item. The line is selected, and the fields automatically load the item's parameters, which user edited.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 boxes. Incoming: Defines which incoming communications users are permitted to connect with. ● Protocol: Select the protocol (TCP, UDP, or ICMP) that can be used by the incoming communication. ● Port: Type the port number that can be used for the incoming communication. Add: Click to add the special application profile to the table at the bottom of the screen.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Enable: Click to enable or disable the DMZ. DMZ Host IP: Type a host IP address for the DMZ. The computer with this IP address acts as a DMZ host with unlimited Internet access. Apply: Click to save the settings. 7.5.7 Firewall Rule This screen leads to set up the firewall. The router provides basic firewall functions, by filtering all the packets that enter the router using a set of rules.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 ● IP Range Start: Type the start IP address that the rule is applied to. ● IP Range End: Type the end IP address that the rule is applied to. Destination: Defines the destination of the incoming packet that the rule is applied to. ● Interface: Select which interface (WAN or LAN) the rule is applied to. ● IP Range Start: Type the start IP address that the rule is applied to.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.6 Management Management leads to set up Remote Management feature. 7.6.1 Remote Management This screen leads to set up remote management. Using remote management, the router can be configured through the WAN via a Web browser. A user name and password are required to perform remote management. HTTP: Set up HTTP access for remote management.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Gaming Mode for these applications to work correctly. When not playing games or using these voice applications, it is recommended that Gaming Mode is disabled.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.7 Tools This page leads to restart the system, save and load different settings as profiles, restore factory default settings, run a setup wizard to configure router settings, upgrade the firmware, and ping remote IP addresses. 7.7.1 Restart Click “Restar”t to restart the system in the event the system is not performing correctly.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.7.2 Settings This screen leads to save settings as a profile and load profiles for different circumstances. User can also load the factory default settings, and run a setup wizard to configure the router and router interface. VPN Pass-Through: Choose enable or disable on the PPTP or IPSec. Save Settings: Click to save the current configuration as a profile that user can load when necessary.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.7.3 Firmware This screen leads to keep the router firmware up to date. Please follow the below instructions: 1. Download the latest firmware from the manufacturer's Web site, and save it to disk. 2. Click “Browse” and go to the location of the downloaded firmware file.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 7.7.4 Ping Test The ping test is to determine whether an IP address or host is present on the Internet. Type the host name or IP address in the text box and click “Ping” to start testing.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Glossary Access Point: An internetworking device that seamlessly connects wired and wireless networks. Ad-Hoc: An independent wireless LAN network formed by a group of computers, each with a network adapter. ASCII: American Standard Code for Information Interchange, ASCII, is one of the two formats that can use for entering the values for WEP key. It represents English letters as numbers from 0 to 127.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 associated work in one of the channels. CSMA/CA: In local area networking, this is the CSMA technique that combines slotted time -division multiplexing with carrier sense multiple access/collision detection (CSMA/CD) to avoid having collisions occur a second time. This works best if the time allocated is short compared to packet length and if the number of situations is small.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Ethernet: A popular local area data communications network, originally developed by Xerox Corp., that accepts transmission from computers and terminals. Ethernet operates on a 10/100 Mbps base transmission rate, using a shielded coaxial cable or over shielded twisted pair telephone wire.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 PPDU: PLCP protocol data unit Preamble Type: During transmission, the PSDU shall be appended to a PLCP preamble and header to create the PPDU. Two different preambles and headers are defined as the mandatory supported long preamble and header which interoperates with the current 1 and 2 Mbit/s DSSS specification as described in IEEE Std 802.11-1999, and an optional short preamble and header.
Product: IEEE 802.11g 54Mbps Wireless Pocket Access Point Model: WL AP 2454 MN1 Certification Notes Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
