User's Manual

Produc t: 8 02 .11 g

ire less PCI Adapte

Mode l: WL VP 2 45 4 2 6A0

GST Confident ia l

3.2 Configuration

This is the page where changes the basic settings of the PCI Adapter with the

minimum amount of effort to implement a secure wireless network environment.

SSID: Service Set Identifier, which is a unique name shared among all clients

and nodes in a wireless network. The SSID must be identical for each clients

and nodes in the wireless network.

Wireless Mode: There are two types available for selection

●Infrastructure – to establish wireless communication with LAN and other

wireless clients through the use the Access Points.

●Ad-Hoc – to establish point-to-point wireless communication directly with other

wireless client devices such as wireless network PCI Adapter.

AdHoc Band: There are two bands available for selection- 11B and 11G

Channel: The value of channel that AP will operate in. User can select the

channel range of 1 to 11 for North America (FCC) domain and 1 to 13 for

European (ETSI) domain and 1 to 14 for Japanese domain.

Tx Rate: Select the data rate for data transmission.

Power Mode: There are 3 modes to choose.

●Continuous Access Mode (default) – the PCI Adapter is constantly operating

with full power and it consumes the most power.

●Maximum Power Save – the PCI Adapter consumes the least power and only

operates when there is wireless network activity.