User's Manual

and press Volume Down Button [6] to decrease volume level. Press the Hang-up 
Button [2] if you want to end the call. 
Press the Top Select Button [3] to mute the microphone during the conversation. You 
can activate the microphone again by pressing the button again. A periodic double tone 
sequence is heard very 5 seconds to remind the users that they are on mute. 
Press the Bottom Select Button [4] to transfer the call to the mobile phone for 
privacy. The Car Kit may be disconnected from the phone after transferring the call. 
You can transfer the call back to the Car Kit pressing [4] again. 
Troubleshooting 
Problem  Suggestions 
Incoming call rings 
only in the phone - 
Outgoing calls from 
the phone are not 
transferred to the Car 
Kit  
• Make sure that not only the pairing process was completed but also that the 
Car Kit is connected to the phone (for example after the Car Kit has been 
turned off.). 
• Check that the Bluetooth mode of your phone is switched on. 
Pairing is unsuccessful 
• Make sure that the mobile phone is in the correct Bluetooth mode and that 
Bluetooth is switched on 
Voice dialling does 
not work 
• Check if the voice tag used works with the phone only 
• If it does, make sure the Car Kit is connected to the phone. 
Last number 
redialling does not 
work 
• Make sure that your phones supports this feature 
Additional Information 
Contacts 
Please contact GlobalTarget should you have any questions or suggested improvements, indicating 
your product’s serial number. 
Email:
 customerservice@globaltarget.com 
Please note:
 For all warranty related issues, please return the product to the shop from which you 
purchased it. 





