User's Manual

Audio Adjust – This adjusts both the Receiver and Camera Audio Settings
Audio Volume - Press left/right key to choose between 0 to 10 volume level at the Receiver (Default is level 5)
TX SPK Volume - Press left/right key to choose between 0 to 10 volume level at the Camera (Default is level
5)
Two Way Audio - Press left/right key to select two way sound communication. (Default is On). Remember
that you need to press the “Talk” Button on the Receiver to talk to the Camera
Time Date Set - Press left/right key to enter time/date setting sub menu.
Time Date Sub Menu -Press left/right key to select Yes. Press OK to enter the sub-menu. Change values by
pressing up/down key. Press left/right key to move to date/time setting position.
Pair Camera Format SD Card
Firmware Version
Pair Camera: Each system will support a maximum of 4 cameras. Each Camera has a unique identify code
which can be found on a label on the back of the camera. The RF Receiver needs to know which cameras
are in the system. Please enter the fixed pairing code of each camera. All codes are 10 digits long (0~F).
Default Setting in the is that all camera IDs are FF.FF.FF.FF.FF.
How to set the camera ID code using the example of Camera 1 having the Code - 01.02.03.04.05:
Press once on the up key to change the first address bit to 01, then press the right key to move to the
second address bit. Press the up key to change to 02, then press the right key again to move to the third
address. Press the up key three times to change to 03 and continue in this manner for the fourth and fifth
address bits. Press OK key to save and go back to the main menu or press mode to exit setup menu.
Format SD Card - You can format the SD card on the Receiver. This will clear the card’s memory. Press
left/right key to select yes and press OK key to confirm SD format.
Firmware Version - In the Pair camera menu, press the right key to move to the i icon, press OK to enter and
the screen will show your Receiver and all your connected cameras firmware versions.
How to playback recorded files whilst in view mode
In camera view mode, please press the mode key to enter playback menu
Playback Menu Date of Record Record file name
Playback Menu - When in playback mode, you can press left/right key to select VIDEO or PICTURE on the
menu to get into the related directory for playback video or single picture (single pictures are recorded in
Cam1 ID 01-02-03-04-05
Main Menu
Cam2 ID 02-03-04-05-06
Cam3 ID 03-04-05-06-07
Cam4 ID 04-05-06-07-08
i
Pair
camera
Cam1 ID 01-02-03-04-05
Main Menu
Cam2 ID 02-03-04-05-06
Cam3 ID 03-04-05-06-07
Cam4 ID 04-05-06-07-08
i
Pair
camer a
Firmware icon
Version
RX : v0.0.5
Cam1 : v0.0.3
Cam2 : v0.0.3
Cam3 : v0.0.3
Cam4 : v0.0.3
Video/Still picture play back
< --- Back
1-224530
1-224545
20100105
20100106
< --- Back
Folder directory File directory
year month date hrs min sec