User Guide

Installation
4
1. Insert memory card
Insert a microSD memory card into the memory
card slot located on the left side of the LCD screen.
Be aware of the orientation shown in the picture
located on the right. (Electrical contacts of the
memory card should be facing the LCD display side
of the camera, with the notches of microSD card
facing up.) When the memory card is successfully
inserted, you will hear a ‘clicking’ sound.
**A Class 10, 8GB or above microSD memory card is required. The camera
supports up to 128GB of memory capacity. (Memory card not included.)
2. Attach mount to camera
Align and position mount connector with the
groved notch located at the top of the camera.
Push mount in the direction towards the LCD side.
Ensure the mount is securely attached before
installing camera.
3. Install the front camera
Find a suitable location on your windshield to install
the camera. We recommend placing the camera
behind the rear view mirror while not obstructing
your view when driving.
Clean the windshield using water or alcohol and
wipe clean with a lint-free cloth before installing.
Ensure the suction mount is clean before installing
to windshield. Rotate the locking knob on the mount
clockwise until it clicks. After that, the camera is
securely mounted on the windshield.