User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
CONNECTING THE BASE STATION15
Pairing a mobile phone or tablet via Bluetooth
1
<20 cm
Bluetooth
2
Press & hold
3s
”Pairing“
Activate Bluetooth on your mobile phone or tablet (see
the instruction manual of your device).
Press and hold the dongle’s button for 3 seconds to
enter pairing mode.
The LED alternately flashes blue and red.
3
keyword:
0000
Search devices...
Sennheiser BTD 800 USB
Laptop Nick
4
3x
”Connected“
Start the search for new Bluetooth devices.
All available devices in the proximity of your mobile
phone or tablet are displayed.
Select “Sennheiser BTD 800 USB” to pair the dongle. If
necessary, enter the default PIN code “0000”.
Once the Bluetooth devices are paired, the LED flashes
3 times blue and then lights up in a constant dim blue.