User Guide
Table Of Contents
- Package contents
- Product overview
- Connecting the base station
- Connecting the base station to the mains power supply
- Pairing and charging the headset before first use
- Connecting the base station to a fixed line phone – SDW 5 BS only
- Connecting the base station to a computer
- Connecting the base station to Bluetooth devices – BTD 800 USB only
- Reconnecting/disconnecting Bluetooth
- Connecting an optional USB headset or speakerphone
- Connecting an optional busy light
- Assembling and wearing the headset SDW 10 HS
- Adjusting and wearing the headset SDW 30 HS | SDW 60 HS
- Labeling the headset
- Configuring the headset system
- Setting up and using the headset
- Making calls using the headset system
- Preparing calls - initial settings
- Selecting audio source – fixed line phone/ computer/ mobile phone
- Making a call
- Accepting/rejecting a call
- Transferring calls to connected devices
- Ending a call
- Redialing
- Putting a single active call on hold
- Managing multiple calls - two calls from two audio sources
- Setting up conference call
- Using the dictation mode
- Listening to music using the headset
- Using the motion sensor
- Charging the headset and storing the headset system
- Sharing a workplace
- Cleaning and maintaining the headset system
- If a problem occurs ...
- Specifications
SDW 5000 series headset system
CONFIGURING THE HEADSET SYSTEM26
Configuring the headset system
Configuring the headset system using HeadSetup™ Pro or the DIP switches
You can adjust the headset system via the software HeadSetup™ Pro or the DIP switches on the base station. Changes
in HeadSetup™ Pro overwrite the DIP switch settings.
HeadSetup™ Pro offers additional settings – marked with the adjacent icon in the following chapters. In
addition to the settings described here, HeadSetup™ Pro offers further configurations – see options in
the software.
1 2 3 4 5 6 7 8
S1 S2
To configure the system via the DIP switches:
Use a pointed object to set the DIP switches to the
desired position. After a DIP switch is changed:
Re-boot the system by disconnecting the power supply
and USB cable shortly from the power.
To configure the system via HeadSetup™ Pro:
Connect the base station to your computer and install
the required software (see page 13).
Start HeadSetup™ Pro.
Click on “Settings” in the menu and choose your
SDW 5000 device.
Change to the desired values and save.
Configuring the desk phone – DIP switches 1 and 2 – SDW 5 BS only
If you do not have a desk phone with an EHS solution, the HSL 10 II can be used for remote call control.
Switch position Function Switch position Function
1 2 3 4 5 6 7 8
DHSG mode
Call control with phones using DHSG
standard
1 2 3 4 5 6 7 8
Panasonic mode
Call control with Panasonic
phones
1 2 3 4 5 6 7 8
Manual mode
Manual operation* of handset or
handset lifter HSL 10 II
1 2 3 4 5 6 7 8
Auto link
Wireless link between headset
and base station established
automatically
1 2 3 4 5 6 7 8
OptiPoint mode
Call control with OptiPoint phones
1 2 3 4 5 6 7 8
MSH mode
Call control with phones using
MSH standard
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
No assigned modes
* For undetectable phones without call control: Touch the icon
to manually establish a link to the desk phone. A
second touch will close the link and allows to operate calls on other audio sources ( / ).