User Manual
69
Setting the date and time (continued)
To set the Time Zone:
1. From the Date & Time menu, press q to highlight Time Zone.
2. Press
Edit
.
3. Press p or q to select your time zone.
4. Press
Save
.
To enable or disable the NTP (Network Time Protocol) server:
1. From the Date & Time menu, press q to highlight NTP server.
2. Press t or u to select Enabled or Disabled.
3. Press
Save
.
Note: If the NTP server is disabled, you must manually set the time and date.
This setting is valid only if the system administrator has already congured
the Network Time settings. For more information, see the VSP736 Deskset
Administrator and Provisioning Guide.
To congure the NTP Server:
1. From the Date & Time menu, press q to highlight NTP and then press
Edit
.
2. On the NTP menu, enter the URL of the NTP server. Press the
ABC
key to
switch between entering upper case letters, lower case letters, and numbers.
3. Press
Save
.
To manually set the Year, Month, Day, Hour and Minute:
1. From the Date & Time menu, press q to highlight Set manually.
2. Press SELECT.
Note: If the NTP server is enabled, you cannot modify this setting. See “To
enable or disable the NTP (Network Time Protocol) server:”.
3. For each setting, press t or u to select the desired setting, and then press
q to move to the next line.
4. When you have nished, press
Save
.
Conguring the Phone