User Manual

95
WebUI
PIN Masking
The PIN masking feature allows you to hide PIN numbers during call operation.
The different types of PIN masking are:
Hide DTMF digits—when Hide DTMF is enabled, PIN numbers entered
during an Active Call are automatically masked.
Password Dial—when Password Dial is enabled, PIN numbers entered as
part of the dial string are hidden. For example, when entering numbers in
Pre-Dial or Dial mode, PIN numbers are automatically masked.
PIN numbers in a dial string are masked in Pre-Dial and Dial modes (including
variants of these modes, such as Transfer Setup, Conference Setup, and
Incoming Call Forward Setup).
PIN numbers in a dial string are masked in Pre-Dial and Dial modes (including
variants of these modes, such as Transfer Setup, Conference Setup, and
Incoming Call Forward Setup).
Setting Description
Enable Hidden
DTMF digits
Enable to mask all DTMF digits entered during an Active Call.
Enable Delay for
Hidden DTMF digits
Enable to add a one-second delay before DTMF digits are
masked. By default, the digits are masked immediately.
Enable Password
Dial
Enable to hide PIN numbers entered as part of the dial string.
Enable Delay for
Password Dial
Enable to add a one-second delay before PIN numbers are
masked. By default, the PIN number is masked immediately.
Password Dial
Prex
Enter the prex that serves as an indicator that the next x digits
are masked (x being equal to the Password Dial Length). Only the
rst matched Prex initiates PIN masking. If additional instances
of the Password Dial Prex appear elsewhere within the dial
string, they are ignored.
Password Dial
Length
Enter the PIN number length. All digits within this length are
masked. Any digits beyond this length are not masked. For
example, if the Password Prex is 99 and the Password Dial
Length is 3, then 9912345 will appear as 99***45.
Phone Lock
You can reset the PIN that unlocks the phone when call restriction is enabled.
To change the Phone Lock PIN:
1. Enter the old PIN.
2. Enter and re-enter a new PIN. The password is case sensitive and can
consist of both numbers and letters (to a maximum of 15 characters).
3. Click Save.