GlC130D-/43 Outdoor CPE User Manual Page 1
Table of contents 1. OVERVIEW ................................................................................................................................................ 4 1.1. USER INTERFACE SPECIFICATION ......................................................................................................... 4 1.2. LTE INTERFACE SPECIFICATION ............................................................................................................ 4 2. GETTINGSTARTED ..............................
PLEASE READ THESE SAFETY PRECAUTIONS! RF Energy Health Hazard The radio equipment described in this guide uses radio frequency transmitters. Although the power level is low, the concentrated energy from a directional antenna may pose a health hazard. Do not allow people to come in close proximity to the front of the antenna while the transmitter is operating.
1. Overview The ODU is a high performance 4G LTE outdoor CPE product designed to enable quick LTE fixed data service deployment to the remote customers. It provides high data throughput and networking features to end users who need both bandwidth and quality service in the remote area. 1.1. User Interface Specification Model ODU 1.2.
Table 2-1 Packing List Outdoor CPE Products Quantity ODU unit 1 Power adapter 1 Power Line 1 Mounting brackets 1 PC Ethernet Cable 1 If you find any of the items missed, please contact our local distributor immediately. CPE Unit： Please unpack the package and check the units as following list. 2.2.
Installing Outdoor Unit (ODU) Mounting Bracket:: Header Connection: Page 6
LED Display LED Indicator Function Description PWR Power Indicator Green Color – Device is powered on RUN System Run Indicator Fast Blinking – Device is rebooting Slow Blinking – Device is in normal operation LAN LAN port status Solid Green – LAN port is up Blinking Green – LAN data activity in progress SIM SIM Card Indicator Light is on – SIM card state ready.
port. The user should ensure that the connected PC acquired IP address via DHCP from the device. After IP connectivity is established between the PC and CPE device, the user may launch a Web browser and specify http://192.168.0.1 in the address bar. A window will pop up requesting password. Input the user login password and then click the “Log In” button. After successful log on, the default home page of the WEB GUI interface will appear. Note that the default user password is “admin123”. 3.2.
Note: After configure any parameters of the device, you must click the “Save & Apply” button to save the configuration otherwise the configuration will not take effect. APN Setting-Bearer configure The Bearer List is design for the operator to configure the APN. You can configure the only one APN for all the service classes, as follow: And the operator also can configure two APNs for Manage and data service classes.
Modify MTU Size The default Operation Mode is Router, and the PC of the user that connected to device LAN port will obtain IP address via DHCP server of the device. The default MTU Size is 1400, user can modify the MTU Size if necessary Change model from Router to Bridge The operation mode could be changed from Router to Bridge if necessary .
The operator’s PC which connected the LAN port of CPE will auto obtain the IP of APN Net when the CPE attached to the APN network, then you can connected to the APN network for data services. And the PC should configure a static IP address as 10.1.1.x manual in order to visit the CPE managing page http://10.1.1.1 . 3.5.
cmd shell and run command: telnet 192.168.0.1 Login: root Password: root123 TR069 Configuration After setting the Device Management Mode as TR069, you must also configure the validity ACS URL for monitoring the device via standard TR-069 ACS systems.
Firmware Upgrade over HTTP Select the Default settings to reset the CPE after upgrade Click on the Browser button to select the firmware file to be uploaded to the device. Click the” Upgrade” button to begin the upgrade process. Please do not interrupt the upgrade process and continue to wait for the following pop window appear. The CPE will reboot after upgrade successful.
Change Password You can select the language or modify the web login password via the Maintenance page. Load Factory Default Click the “Restore” button will restore the device to original factory setting. User will need to reconfigure the authentication setting in order to get the device operational. Maintance—>System Rest—>Restore 4. FAQ and Troubleshooting 1) My PC cannot connect to the CPE. Re-plug the PC Ethernet cable and check if the PC LAN connection is up or showing activity.
2) My PC cannot acquire IP from the CPE. First check if the NIC is up and working properly. Then check the PC NIC configuration and make sure the DHCP is enabled. Open the MS-DOS window, enter “ipconfig /release” and “ipconfig /renew” commands and see if PC can obtain IP correctly. If the problem persists, please contact the operator or distributor for further diagnose. 3) My CPE networking is not working properly. You may want to check if the LTE connection is up and running properly.
