User's Manual

Page 11
The operator’s PC which connected the LAN port of CPE will auto obtain the IP of APN Net
when the CPE attached to the APN network, then you can connected to the APN network for
data services. And the PC should configure a static IP address as 10.1.1.x manual in order to
visit the CPE managing page http://10.1.1.1 .
3.5. Service Configuration-DMZ Setting
By enabling this option will make the specified local LAN host (DMZ IP) was exposed to the
Internet, all ports can be accessed by other computers on the Internet.
3.6. System Maintenance
WEB GUI menu to configure the device in more details (see diagram below). The configuration is
easy to use and self explanatory.
 Telnet Enable (for beta release)
The users can telnet to the CPE in the beta release when set the Remote connection as Enable.
Then set the Access Control as Unrestricted Access.