User's Manual

Page 14
 Change Password
You can select the language or modify the web login password via the Maintenance page.
 Load Factory Default
Click the “Restore” button will restore the device to original factory setting. User will need to
reconfigure the authentication setting in order to get the device operational.
Maintance—>System Rest—>Restore
4. FAQ and Troubleshooting
1) My PC cannot connect to the CPE.
 Re-plug the PC Ethernet cable and check if the PC LAN connection is up or showing
activity.
 Check if the system run LED is on. If it is not, check the power cord and make sure it is
connected properly. Also verify that the AC power supply is available.
 If the PC LAN shows no activity and system run LED is off but the power cord is
connected properly and there is AC supply, then it is likely the adapter is damaged.
Please contact distributor to obtain replacement part.