User's Manual

Page 8
port. The user should ensure that the connected PC acquired IP address via DHCP from the
device. After IP connectivity is established between the PC and CPE device, the user may launch
a Web browser and specify http://192.168.0.1 in the address bar. A window will pop up
requesting password. Input the user login password and then click the “Log In” button. After
successful log on, the default home page of the WEB GUI interface will appear. Note that the
default user password is “admin123”.
3.2. LTE Status Display-Overview
Once the user is logged in, the following window LTE Information window will be prompted for
viewing. The page gives quite detailed LTE information including the System Information.
3.3. LTE Configuration
 Radio Settings-ND&S Configure
There is a LTE radio button which is used for the user can turn the radio on or off to restart the
LTE module.
The CPE would scan frequency auto as soon as the system has completed the startup
procedure, and you can configure the fixed Frequency manual as follow: