Instructions / Assembly

9 | P a g e
Water Cooler Connections
When you receive the water cooler, the water connections on
the back have of the cooler have tube plugs in them. These tube
sections must be removed before making all your connections. To
remove the tube sections see figure 7 “Disconnect”. The 1/4" plastic
tubing should be used for making the Feed Water. The drain
connection for (RO) models will come off the separate filter pack. If
hard copper tubing is used for the Feed Water and Drain connections
the bulkhead fittings must be changed to a metal fitting.
Figure 4. Water Cooler Connections