Instructions / Assembly

Support videos are available at: https://bluline.com/support/

Filter Replacement

The filter elements must be replaced at regular intervals to maintain the

quality of the water.

better tasting water.

For more information please visit:

https://bluline.com/filter-replacements

The G5F has 3-stages of mechanical filtration. 1st stage 5-micron

sediment filter, 2nd stage activated carbon filter and a 3

stage post

carbon filter. The filter elements in all stages must be replaced every 6

months. Damage to the filters, fittings and unit will occur if filters are

not changed.

The G5RO model has the 3-stages of filtration plus an additional

Reverse Osmosis membrane filter. The 2 per filters and 1 post filter must

be replaced every 6 months. The Reverse Osmosis membrane must be

replaced every 3 years.

Replacement Procedures, Filtration Versions (F) G5F Coolers

a) TURN OFF POWER TO HOT/COLD ELEMENTS

b) Swing open the front hinged cover.

c) Close the ball valve to stop water flow through the filters.

d) Place a towel under the filters to catch water. The filters will have

water in them which will run out when the filters are unlocked.

e) Twist the filters to remove them from their housings.

f) These filters are disposable, encapsulated filters. Remove and

discard the entire filter body. Replacement filters are sold as a set:

Stage sediment filter

Stage carbon filter P/N TWSET

Stage post carbon filter

f) Twist new filters on the housing brackets.

g) Open ball valve and let water flow through filters, when the cooler

is full empty out the water into a bucket. This will eliminate the

first batch of water which is full with carbon fines.

h) After the cooler fills up again turn on the power to the cold and

hot tanks. Wait a few minutes to assure there are no leaks and

close the filter door.