Instructions / Assembly

Support videos are available at: https://bluline.com/support/

Reverse Osmosis Membrane Replacement

RO versions (RO) (every 3 years)

a) Use the same procedure as above sec a-c.

b) Remove the RO stage from the clips. Disconnect the white tubing

from the RO housing cap.

c) Remove the cap from the housing by unscrewing it.

d) Using a pair of pliers, remove the RO element from the housing by

grasping the tube end and pulling it out.

e) Use RO filter replacement P/N 50GPD. Insert the element into the

housing with double “o”-ring end going in first–toward the bottom

of the housing. Make sure the “o”-rings are sealed. Replace the

cap. Reconnect the white tubing. Proceed as in above sec. g.

Figure. 8 RO Membrane Installation