Instructions / Assembly

Support videos are available at: https://bluline.com/support/
6
Operation
When installation is complete, the
unit will fill up with water and shut
off when the tanks are full. Plug
the unit in to an outlet and press
the cold/hot faucets until a steady
stream of water comes out.
Figure 2. Faucet operation
*Make sure the tanks are filled with
water before continuing to the next
step.
Turn on the hot/cold switches
located on the back of the cooler.
Both hot/cold elements will begin
chilling and heating the water inside
the unit. Indicator lights will also
illuminate of the front of the cooler.
Figure 2. Hot and cold power on/off switch