Instructions / Assembly

Support videos are available at: https://bluline.com/support/

How the Connections Work

When you receive the water cooler, the water connections on

the back of the cooler have tube plugs in them. These tube sections must

be removed before making all your connections. To remove the tube

sections see figure 7 “Disconnect”. The 1/4" plastic tubing should be used

for making the Feed Water and Drain connections. Your local building

code or building management may require the use of copper tubing. If

hard copper tubing is used for the Feed Water and Drain connections the

bulkhead fittings must be changed to a metal fitting.

Figure 4. Water Cooler Connections