Use and Care Manual

3 | P a g e
Introduction
Congratulations on your purchase of our revolutionary Bottle-less Water
Cooler! Our coolers are all designed to replace the conventional 5 gallon
water bottle while eliminating the hassles of deliveries, lifting bottles
and eliminating plastic bottles from landfills. Our coolers are designed
to produce pure great tasting water for the whole family that is clean
and safe to drink.
Our coolers are connected to your city or well water supply to efficiently
filter out tastes and odor, and to remove microscopic contaminants by
using reverse osmosis purification technology. We manufacture a wide
range of models to fit any home or office application.
The G5 Model has 3 temperature faucets; cold water is chilled around
44ºF, hot water is heated at 180ºF and ambient.
All Global Water models are manufactured and marked as “RO” or “F”
assemblies. The “RO” assembly utilizes CSM Reverse Osmosis water
purification technology which produces pure safe water from city or
well water. The “RO” assembly is comprised of a 5-micron sediment
filter, a carbon (GAC) 10-micron filter, CSM RO membrane and a post
carbon filter to improve taste. The “RO” filter assembly requires a drain
line connection to be installed which removes rejected water to the
sewer.
The “F” assembly is comprised of sediment and carbon filter system, but
not the RO membrane; therefore, it does not require a drain line
connection.
CAUTION: The filter version “F” must be used only with softened
water or water that has less than 3.5-grains of hardness to prevent
scaling and premature burnout of the heating elements.
Please read all the instructions in this manual before operating this unit.