BT-328 User Manual page 1 of 10 BT-328 Bluetooth GPS Receiver User manual, version 1.
BT-328 User Manual page 2 of 10 1.
BT-328 User Manual page 3 of 10 2. System Specification Model Name BT-328 Electrical Characteristics (Receiver) Chipset Frequency SiRF GSC2 L1, 1575.42 MHz C/A Code 1.023 MHz chip rate Channels 12 Tracking Sensitivity -155 dBm Accuracy Position Horizontal WAAS enabled Time Velocity 10m 2D RMS 5m 2D RMS 1 micro-second synchronized to GPS time 0.1m/sec 95% Datum Datum WGS-84 Acquisition Rate Hot start 8 sec. average (with ephemeris and almanac valid) Warm start 38 sec.
BT-328 User Manual page 4 of 10 3. Bluetooth Specification Bluetooth V1.2 Compliant Supply Voltage Frequency Range Receiver Sensitivity Transmit Power Transmitting Range Power Consumption 2.8V ~ 3.3V 2.042 ~2.480 GHz – 80 dBm Class 2 10 m 45 mA (Typical) 4.
BT-328 User Manual page 5 of 10 6. Getting Started Turn the device on and off Power on: Press the power button for 1 second until the GPS status LED is on. Power off: Press the power button for 1 second until the GPS status LED is off. AC Adapter jack The power jack allows you to connect either a DC car charger (included) or AC adapter (included) to recharge the internal battery. Please note that the adapter is rating 5V, 1.2A, positive pole center.
BT-328 User Manual page 6 of 10 7. Usage 7.1 Connect BT-328 to your Bluetooth device (1) Press the power button to turn on the BT-328. (2) The Bluetooth device could be “a PDA with built-in Bluetooth”, “a PDA with Bluetooth Compact Flash card”, or “a Notebook with Bluetooth device”…etc. (3) Please refer to the user manual of your Bluetooth device and enable the it for connecting to BT-328. Some Bluetooth device may need the Bluetooth passkey, the passkey is “0000“.
BT-328 User Manual page 7 of 10 4. Tap the “Devices” tab, and tap “New Partnership…”. 5. It will search for all the Bluetooth devices. 6. Select a device (for example “BT-GPS-328EB2”) and tap Next. 7. Enter Passkey “0000” and tap Next. 8. Check “Serial Port” and tap Finish.
BT-328 User Manual page 8 of 10 9. The device will be shown on the list. 10. Tap the “COM Ports” tab, and select “New Outgoing Port”. 11. Select the device and tap Next. 12. Uncheck “Secure Connection” and from the drop down box select a COM port number (for example, COM8), and then tap Finish.
BT-328 User Manual 13. The device with it’s COM port number will be shown on the list. page 9 of 10 14. Now you can go to GPSinfo program, set the correct COM port and test the GPS receiver.
BT-328 User Manual page 10 of 10 8. Test the BT-328 Bluetooth GPS Receiver Please install the GPS Information program. It is included in the CD, file name could be “GPSinfo.exe” or “GPS Information.exe”. This testing program only supports the Microsoft Windows CE & Pocket PC based PDA platform. Please refer to the GPSinfo User Manual for more detailed guide. 9. Troubleshooting Bluetooth is unable to connect (1) Check if the Bluetooth status LED is flashing normally.
