User's Manual

2.6 HOW TO TURN ON/OFF HEADSET
To turn the headset on
Press and hold the Multifunction button until the headset indicator light flasheds blue
four times.
To turn the headset off
Press and hold the Multifunction button until the headet indicator light flasheds red
four times .
2.6 MAKING AND ANSWERING CALLS
Phone functionality is still available when the headset is connected. You can make
and answer calls using the buttons on the headset. or the keys on the phone, as usual.
To make a call using voice dialing
1. Make sure the phone and the headset are on and within range of each other. Press
the multifunction button.
2. It may take a while to set up the connection between the phone and the headset.
During this time, you might hear a repeated tone in the headset. After the beep,
voice dial as you normally would.
3. End the call by pressing the multifunction button.
To answer a call using the multifunction button
1. When the headset rings, press the multifunction button.
2. End the call by pressing the multifunction button.
To reject a call
When the headset rings, press and hold the multifunction button until you hear a long
beep.
USING VOICE COMMANDS
Voice commands are especially useful when you are using the headset. Examples of
voice commands are dialing, re-dialing, answering and rejecting calls. For more
information on voice commands, refer to the phone’s user documentation.
ADJUSTING THE VOLUME
You can adjust the headset speaker volume during a call, or the ring volume when you
are not engaged in a call.