User Manual

8
the battery power, and all the LED will go off simultaneously.
► Power jack
You can use either the DC car power charger (included) or the AC
adapter (optional) to connect to the power jack of BTT-100 to
recharge the internal battery. Please note that the adapter rating 5V,
1.2 A, positive pole center.
► Usage
Connect BTT-100 to your Bluetooth device
(1) Press the power button to turn on the BTT-100.
(2) The Bluetooth device could be “a PDA with built-in Bluetooth”,
“a PDA with Bluetooth Compact Flash card”, or “a Notebook
with Bluetooth device”…etc.
(3) Please refer to the user manual of your Bluetooth device and
enable it for connecting to BTT-100. Some Bluetooth device
may need the Bluetooth passkey, the passkey is “0000”.
(4) Check the number of COM port used by the Bluetooth device.
(5) Run the suitable mapping/navigation software and select the
correct COM port & Baud rate: 38400.
Note: Most of the application software of Bluetooth device has an
auto-detect feature, so you don’t have to manually select the Baud
rate.