User's Manual

TOC
10
GH
-
207 User Manual
4.2 Go SETTING > AUTO LAP to choose Auto Lap by TIME
4.2.1 Configure the time you want to automatically count the lap.
4.2.2 Once your run reach the time you configured for a lap, the screen will display like below
for 4 seconds and go back to the page you’ve configured.
5. USER
5.1 To set up your own weight, height, gender and birthday for better calculations.
6. PAIR
6.1 If you have and prefer to use BLE HRM chest belt, please go (Pair BLE Heart Rate Monitor
(HRM) chest belt) for paring.
6.2 For Phone paring, please go (Pair with your phone).
7. About
7.1 VERSION
7.1.1 FIRMWARE
7.1.1.1 Here shows you the main firmware version. Ex. F-0GH-2X-1501152, 150115 is the
date of FW released which is 2015 Jan 15
th
.
7.1.2 BLE FW
7.1.2.1 Here shows you the BLE firmware version. Ex. F-BLE-29-1503271, 150327 is the
date of FW released which is 2015 Mar 27
th
.
NOTE: To check firmware information, please refer to Get More Information.
7.2 RESET
7.2.1 Allow you to reset the watch back to factory setting.
7.2.2 Default value is DON’T!! in case incidentally trigger reset.
7.2.3 Even OK! Was pushed, double confirmation will reserve a second chance.
Pair BLE Heart Rate Monitor (HRM) chest belt
NOTE: if you don’t have a BLE Heart Rate Monitor, you can skip this section.
Wear the Bluetooth Low Energy (BLE) heart rate monitor directly on your skin, just below your
breastplate. It should be snug enough to stay in place during your run.