User's Manual

TOC

207 User Manual

1 Wrap the strap around your chest, and connect the strap hook to the loop.

2 Connect the heart rate monitor module to the strap.

3 Wet the electrodes (Location A and B) on the back of the

strap to create a strong connection between your chest

and the transmitter.

NOTE: Some heart rate monitors have a contact patch.

Wet the contact patch.

4 Bring the watch in front of you and ensure the transmission range within

(2m)

of the heart rate monitor.

TIP: If the heart rate data is erratic or does

not appear, you may have to tighten the

strap on your chest or warm up for 5 to 10 min.

NOTE: Move away (20m) from other sensors while GH-207 is trying to pair

with your heart rate monitor

5 After you put on the heart rate monitor, it is on standby and ready to send data.

6 Go to your watch, enter SETTINGS > PAIR > HR SENSOR > ON, start

paring for 60 sec. Please follow the display instruction.

7 When you see PARIED on screen, your watch now paired and

remembers this HRM belt.

Pair with your phone

1. Pair with iPhone

1.1 Turn on your watch.

1.2 Enter SETTINGS > PAIR >PHONE, Push to broadcasting for

phone pairing. You will see WAIT! and flashing on the

screen.

1.3 Turn on Bluetooth in your iPhone.

1.4 Enter gRun

1.5 Tap on Import which in the top right corner in the Activities

page. gRun will search for GH-207.

1.6 When gRun see your GH-207, tap on GH-207 and tap OK on the top right corner.

1.7 There will be a number input dialogue pop up on iPhone screen.