User's Manual

will search for GH-209.

2.6 When gRun see your GH-209, check on GH-209 and tap OK on the top right corner.

2.7 There will be a number input dialogue pop up on Android phone screen. Check on your watch

screen, a 6 digits number will shows. Input this number in your Android phone and tap on OK.

2.8 Watch will show you PAIRED when this process success. Leave phone pair setting on your

watch at ON.

NOTE: If you switch SETTINGS > PAIR > PHONE to OFF on your watch, you will need to Forget or

Unpaired device GH-209 at your phone > Settings > Bluetooth, and go through this pairing

process again.

Go for a Workout

1 Hold to turn on the watch.

2 Push go WORKOUT to choose either run outdoor or indoor

2.1 If you are going to run OUTDOOR

NOTE: It may take 30 to 60 sec to locate satellite signals.

2.1.1 Go outside to find open sky area and hold your position.

2.1.2 Enter WORKOUT > OUTDOOR.

2.1.3 If you never paired any HRM belt before.

2.1.3.1 The watch will start detect your heart rate by Optical

HRM and search GPS location. Optical HRM will detecting up

to 30 sec and verify with you if continue search or bypass to go ahead to start a run.