User's Manual

2.1.3.2 When watch detected your heart rate and GPS fixed, you will see READY? on the
screen. If you are ready, push to see GO! and start your run.
2.1.4 If you already have HRM belt paired and you wear on it. (Pair wireless 2.4GHz Heart Rate
Monitor (HRM) chest belt)
2.1.4.1 The watch will searching for both GPS and HRM belt, and search HRM belt up to 20
sec and switch to optical heart rate monitor if not detect a HRM belt.
2.1.4.2 When watch connect to your paired HRM belt and GPS fixed, you will see READY? on
the screen. If you are ready, push to see GO! and start your run.
2.1.5 If GPS not yet located and/or HRM not yet connected, but you still want to ahead for a run,
push to let it search in background.
NOTE: If you don’t to run with HRM belt and you want to use Optical HRM when you start a run,
go
SETTINGS > PAIR > HR SENSOR to select OFF.
2.1.6 If the watch indicates that a GPS was not fixed yet for long, move away from any tall
13