User's Manual

achieved if the product can be kept as far as possible from the user body or set the device to lower output

power if such function is available.

Device Care

Cleaning the Watch

NOTE:

1. Do not use a sharp object to clean the watch.

2. Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and

finishes.

3. Thoroughly rinse the watch with fresh water after exposure to chlorine, salt water , sunscreen,

cosmetics, alcohol, or other harsh chemicals. Prolonged exposure to these substances can

damage the case.

1 Wipe the watch using a cloth dampened with a mild detergent solution.

2 Wipe it dry.

Cleaning the Heart Rate Monitor

A build up of sweat and salt on the strap can decrease the ability of the heart rate monitor to report

accurate data.

Keep the transmitter strap in a cool and dry place to maximize the heart rate sensor battery lifetime.

Never put the strap in a washing machine or dryer.

1 Rinse the strap after every use.

2 Hand wash the strap occasionally, using a tiny amount of mild detergent, such as dishwashing liquid.

Troubleshooting

Replace Heart Rate Monitor Battery

NOTE: If you cannot link to your paired Heart Rate Monitor Belt, maybe the battery required

replacement.

1 Four screws are on the back of heart rate monitor module.

2 Remove four screws and you can replace the new CR2032 battery.