User's Manual

TOC
13
3 Wet the electrodes (Location A and B) on the back of
the strap to create a strong connection
between your chest and the
transmitter.
NOTE: Some heart rate monitors
have a contact patch. Wet the
contact patch.
4 Bring the watch in front of you and ensure the transmission range within (2m) of the heart
rate monitor.
TIP: If the heart rate data is erratic or does not appear, you
may have to tighten the strap on your chest or warm up for 5
to 10 min.
NOTE: Move away (20m) from other sensors while GH-208 is
trying to pair with your heart rate monitor
5 After you put on the heart rate monitor, it is on standby and ready to send data.
6 Go to your watch, enter SETTINGS > PAIR > HR SENSOR > ON,
start paring for 60 sec. Please follow the display instruction.
7 When you see PARIED on screen, your watch now paired and
remembers this HRM belt.
Pair with your phone
1. Pair with iPhone
1.1 Turn on your watch.
1.2 Enter SETTINGS > PAIR >PHONE, Push to broadcasting for phone pairing. You
will see WAIT! and flashing on the screen.
1.3 Turn on Bluetooth in your iPhone.
1.4 Enter gRun
1.5 Tap on Import which in the top right corner in the Activities
page. gRun will search for GH-208.
1.6 When gRun see your GH-208, tap on GH-208 and tap OK on the
top right corner.