User's Manual

TOC

Configure your watch for First Use

The first time you power on the watch, you will set up language, units, date/time, time

format and personal profile.

1 Press and hold for more than 2 sec to power on the watch. The watch then begins

the first-time setup process.

1.1 If first-time setup does not begin, press to go to the main menu, then select

SETTINGS > ABOUT > RESET > OK! The watch then enters factory reset process and

turn power back on automatically.

2 Follow the instructions shown in the watch’s display, using , , and .

Configure your watch before workout

This section intends to assist you to customize your own GH-208. The sequence of items is

referring to the actual watch screen except PAIR due to its importance to the training

result.

1 GENERAL

1.1 Language

1.1.1 Currently offer English only. We will provide more language options for your

choice in near future.

1.2 ALARM

1.2.1 When you set up a time and turn alarm ON, you will receive buzzer alerts when

time is up. Also the vibration alert if you turn on alarm vibration (SETTINGS >

GENERAL > VIBRATION > ALARM > ON).

1.3 DATE, TIME

1.3.1 To choose 24H or 12H system.

1.3.2 Configure your local date and time.

1.4 SOUND

1.4.1 Turn ON in KEY, buzzer will beep when you push buttons.

1.4.2 Turn ON in WORKOUT, buzzer will beep in a unique sound when you push to

GO, PAUSE for a run.

1.5 VIBRATION

1.5.1

Vibration alert for ALARM, TARGET and NOTICE.

1.5.2 Turn ON for ALARM to vibrate when set up time is up.