User's Manual

For example, Module setting is as below:
Group ID is 0. Air rate is 0.81K bps. RF frequency is 915.000MHz. RF power is 20dBm.
UART Baud Rate is 9600bps. UART parity is none. Wakeup time is 1 sec.
Write the setting:
0xFF 0x4C 0xCF 0x52 0xA1 0x57 0xF1 0x0D 0xF6 0x38 0x00 0x00 0x07 0x03 0x00 0x05
Response:
0x24 0x31 0x30 0x31 0x4C 0x31 0x35 0x30 0x37 0x32 0x39 0x31 0x2A 0x1D 0x1C 0X1D
0x1E 0x1F 0x2A 0x2B 0x00 0x0D 0xF6 0x38 0x00 0x07 0x03 0x00 0x05 0x21