TR-102 User Manual Ver 1.
TR-10 Table of Contents 1. Introduction ........................................................................................................... 4 2. Features ............................................................................................................... 4 3. Specification ......................................................................................................... 5 4. Start-up .................................................................................................
TR-10 8. Tracking by SMS mode ..................................................................................... 22 8.1 Setup SMS return type ........................................................................................ 22 8.2 Send SMS from a cell phone to TR-102 ............................................................. 22 8.3 TR-102 sends SMS to cell phone ....................................................................... 22 8.4 Displaying the location on map .......................
TR-10 1. Introduction TR-102 is a personal remote positioning device with built-in GPS and GSM modules; it’s compact and portable. Not only can TR-102 transmit the longitude and latitude coordinate to your cell phone by the short message service, but it can also transmit the longitude and latitude coordinate to your personal computer by the internet connection of GPRS and then displaying the location by a specific map software. There are three speed-dial keys and one emergency key on the TR-102.
TR-10 Software Feature Professional Call Center program, supporting the operating system such as Windows 98 /2000 /XP, also supporting up to 5 sets of TR-102's tracking function at the same time by using the GPRS mode. Clicking on one of the TR-102's user name from the Call Center program will open a browser with the latitude and longitude information displaying as a point at the center of the maps.google.com. The display map is Google's patented right. 3.
TR-10 Cold start: 42 sec., average Altitude Limit: 18,000 meters (60,000 feet) max. Velocity Limit: 515 meters/second (1000 knots) max. Acceleration Limit: Less than 4g Jerk Limit: 20 m/sec3 Operating temperature: -20° to 55° C Humidity: 5% to 95% Non-condensing Dimension: 115 mm × 45 mm × 22.5 mm Voltage: Rechargeable and replaceable 1300 mAh battery (3.7V), 5V for charging input.
TR-10 . Start-up 4.1 Accessories 1. TR-102 2. 1300 mAh Li-ion Battery 3. Mini USB cable 4. AC power adapter 5.
TR-10 4.2 Charging the battery Before you can use the TR-102, you must complete the following procedures: 1. Fully charge the battery. Before your first time using of TR-102, please connect it with AC power adapter for battery charging at least 10 hours under the power-off condition. (The included battery is specially designed for TR-102. Please do not use other type of battery; otherwise it will damage the device. If you need to change the battery for TR-102, please contact you local dealer.) 2.
TR-10 . Hardware Overview 5.
TR-10 5.2 Button description Power button Turn on / Turn off: Please see 7.1 for details. SOS button You can assign up to 3 sets of phone numbers to the SOS button. When this button is pressed, TR-102 will send its location information to these 3 sets of phone numbers by SMS. TR-102 will first call the SOS number 1 and send the location information by SMS. Following, TR-102 will repeat the same procedure to SOS number 2 and 3.
TR-10 . TR-10 Setup and Call Center Operation 6.1 Install the USB driver 1. Insert the CD into CD-ROM drive. When the autorun dialog box is displayed, click on "Install USB Driver" button to install the TR-102 driver. 2. You will see dialog box 1, click on Next to continue. 3. When installation is complete, click on Finish to close the dialog box 2. 4. Reboot your PC to activate the USB driver.
TR-10 6.2 Install the Call Center program 1. From the autorun dialog box, click on the "Install PC Software" to install the Call Center program. 2. Follow instruction of dialog box 1 to continue the installation. 3. When the installation is complete, click on Finish in dialog box 2 to close the dialog box.
TR-10 6.3 Call Center Operation Menu item Icon button Description File > Save File (KML) Save the records as the KML format. You can import the KML file to Google Earth, and it will display the location route. This function only works under the "Search Records" mode. File > Exit Close the Call Center program. View > GPRS Tracking Switch to GRPS Tracking mode. You can view the information of TR-102 which is on line.
TR-10 6.4 Basic Setting 1. Connect the USB cable to TR-102 and the PC's USB port after installing the driver. 2. Turn on the power of TR-102: (i) Please wait for a while until the startup process is finished. (ii) Press and hold the "Answer/Hang up" button about 5 seconds until you see the three LEDs flashing slowly and simultaneously. Release the button and it will enter the setup mode. 3. Start the TR-102 Call Center program in your PC (or double click on the "TR102-Call Center icon from desktop).
TR-10 item option description Return Type GPRS TR-102 will return the location information by GPRS. SMS TR-102 will return the location information by SMS. Off TR-102 will not ring and user can not answer the call. When received a call or SMS, TR-102 will return the location information by the way of "Return Type". (please see figure. 3 in page 32) Answer Mode On When received a call, TR-102 will ring, and user can answer the call. (please see figure.
TR-10 Note: The returned SMS from TR-102 to your mobile phone will be the following format: (example) Position Report: TR102 2005/01/02 11:20:30 24.9965,121.4877 GPS fixed • The second line shows your User Name (default is "TR102"). • The third line contains the date and time. (yyyy/mm/dd hh:mm:ss) • The fourth line contains the longitude and latitude. You can copy this value and input it to "Google Earth" or maps.google. com to find this position on map.
TR-10 1 item description Phone Number 1~3 These 3 numbers are same as Quick Dial number, you can not modify it from here. Phone Number 4~10 You can set number 4 ~ 10. item description IMEI International Mobile Equipment Identity Firmware Version Firmware version of TR-102 Name Input a user name here. (Default is TR102) Phone Input the phone number of this TR-102.
TR-10 item description GPRS user name Please consult your Call Center system administrator for all other parameter values. GPRS user password GPRS apn GPRS_dns1 GPRS_dns2 item description GPRS Port Default GPRS Port is "5000". GPRS Server Host Set the GPRS server host name.
TR-10 . Operating the device 7.1 Turn on / Turn off ● Turn on: When the device is off, press the Power button for 3 seconds, three LEDs will start to flash quickly from top to bottom. It will enter the standby mode with blue LED flash slowly after the startup process is finished. (During the startup process, it can not be turned off.) When the device is on, GPS will start to locate its position with the green GPS LED flashing. If location is fixed, the LED will be on for a few seconds and then goes out.
TR-10 7.3 Adjust the volume ● While in talking, you can press the "+" button to increase the volume. ● While in talking, the other party will not hear from you if the mute button is pressed to mute the microphone; press it again to enable the microphone. ● While in talking, you can press the "-" button to decrease the volume. 7.4 Making a phone call ● If you have already setup the Quick dial number, then you can press the Quick dial button to make a call to the preset number.
TR-10 7.5 Send out emergency SMS ● If you have already assigned 3 sets of phone numbers to the SOS button, press this button on the TR-102 will send out its location information to these 3 sets of phone numbers by SMS. To avoid accidentally touching of this button, when you want to send out the emergency SMS, please make sure you press this button for over 2 seconds and release. ● TR-102 will first call the SOS number 1 and send the location information by SMS.
TR-10 . Tracking by SMS mode 8.1 Setup SMS return type • Connect the USB cable to TR-102 and the PC's USB port. • Enter the setup mode. Select "SMS" Return Type from "Phone Mode" tab. 8.2 Send SMS from a cell phone to TR-102 • Send a short message to TR-102 to trigger it for sending back the location information. (The message content can be anything, even a blank message.) 8.
TR-10 8.4 Displaying the location on map ● Start the Google Earth software. (For more information about the Google Earth software, please refer to “TR-102 Supporting User Manual En_Free Google Earth Software.pdf” which you can find them in the CD-ROM under the “Manual” folder.) Input the latitude and longitude that you received from SMS and click on search button. The Google Earth will display the location map for you.
TR-10 ● Or you can start the Internet Explorer and type "http://maps.google.com" to connect to Google Map website for displaying the location map. Select "Satellite" or "Hybrid". It depends on Google Map whether your area is supported by this mode or not. Input the latitude and longitude that you received from SMS and click on Search button. The Google Map will display the location map for you.
TR-10 . Tracking by GPRS mode 9.1 Setup GPRS return type • Connect the USB cable to TR-102 and the PC's USB port. • Enter the setup mode. Select "GPRS" Return Type from "Phone Mode" tab. 9.2 Trigger the TR-102 to connect to Internet by GPRS • If the Answer Mode is "Off", you can use the cell phone to call TR-102, or send a short message to TR102 to trigger it for connecting to internet. • If the Answer Mode is "On", you can only send a short message to TR-102 to trigger it for connecting to internet.
TR-10 9.3 Send a command from Call Center to TR-102 • You can send command to TR-102 by the following steps and make it send back the location information: (1) Start the TR-102 Call Center program and click on "GPRS" > "Start" from menu bar to start the connection for internet. (2) Click on "GPRS" > "Send Message" to display the Send Message box. (3) Select the Name, Return Mode, and Second if necessary. Click on OK button to send out this command.
TR-10 Return Mode Return Time (second) description Immediate report N/A When TR-102 receives this command, it will send the report back immediately. It will send one or two times, and the GPRS connection is still on. While TR-102 is in the "immediate report" mode, blue LED will flash once per second; and it begins to start GPS function with green LED flashing. When position is fixed, green LED will be on until it gets the next report request.
TR-10 9.4 TR-102 sends back location information to Call Center • When TR-102 receives a command, it will send back the location information by GPRS. Please switch to GPRS view in the Call Center program and you can see the most updated information is displayed in the top of the list.
TR-10 9.5 Displaying the location on map ● Click on Map from menu bar, you can setup the program to display the map by "Google Map" or "Google Earth". ● If you have checked the View > Show Map, the Call Center program will make the "Google Map" or "Google Earth" to refresh the display when receiving the updated information. ● Or you can double click on any item, it will also show the location map on "Google Map" or "Google Earth".
TR-10 10.
TR-10 1
TR-10 Mobile Phone Answer Call Figure. 1 TR-10 Answer mode is "On". SMS (Any content, include blank SMS.) Mobile Phone TR-10 SMS Figure. 2 example Position Report: TR102 2005/01/02 11:20:30 24.9965,121.4877 GPS fixed Answer mode is "On". Call or SMS (Any content, include blank SMS.) Mobile Phone SMS Figure. 3 example Position Report: TR102 2005/01/02 11:20:30 24.9965,121.4877 GPS fixed TR-10 Answer mode is "Off".
TR-10 Mobile Phone SOS number 1 TR-10 SMS SOS number 2 When SOS button is pressed. example Emergency Report: TR102 2005/01/02 11:20:30 24.9965,121.4877 GPS fixed Figure. 4 SOS number 3 TR-10 Mobile Phone Quick Dial number Call Answer Figure. 5 When Quick Dial button is pressed.
TR-10 11. Troubleshooting and Safety info status cause solution After you turn on the power of TR-102, the three LEDs are flashing simultaneously. The SIM card is not inserted. Please insert the SIM card into TR-102. The SIM card is inserted in the TR102, but it has the PIN code protection enabled and the PIN code is mismatched. Please take out the SIM card, use your mobile phone to disable the PIN code protection and then insert the SIM card back to TR-102.
TR-10 ► When you press the KML button, only the item with GPS fixed (2D or 3D) will be exported. If all the items are "No Fix", then it can not be exported to the KML file, and you will see the error message with "No effective data". ► When the device is turned on, it will begin to do the initialization process, and you will hear a short “toot” sound from the speaker. This is a normal situation, not a defect. ► Please avoid storing the device in an excessive heat or humidity place.
TR-10 FCC Regulations: • This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
TR-10 cific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.
