User's Manual

TR-151A page 39
4.10. How to set TR-151A enter Parking Mode?
Parking Mode is for users to make TR-151A to send out an alarm SMS to inform user while it
senses vibration.
Users can use Call Center or SMS to configure parameters: Enable parking time, telephone
number, time interval and number of report.
 While the device is powered on, press the power button to enter parking mode. The status
LED will flash specific times to indicate the parking mode is enabled.
 Press the power button again to exit from the parking mode.
User can also send an SMS by a mobile phone to set the parameters of parking mode.
The format of SMS is following as:
?7,IMEI,5,Park_Time,Park_Interval,Park_Number_of_Reports,Report_format,Sensitivity,Park_R
eturn_Number,Return_Phone_Number!
The table below explains the content of the SMS
Format Description
?7 Start sign and function code
IMEI IMEI of TR-151A
5 Setting code for Parking setting
Park_Time Set the active time for entering parking mode. The unit is second.
Park_Interval Time interval of sending data report. The unit is second.
Park_Number_of_Reports
Set how many report will be sent.
0 Æ continuous report
X Æ X times report
Report format
0 Æ Format0
1 Æ Format1
Sensitivity
Set the number of vibration which enables TR-151A to send out alarm. The
number you can set is 1～255. Larger value means less sensitive.
Park_Return_Number Return phone number for default report mode.
Return_Phone_Number
The confirmed SMS sent to the phone number to indicate the setting is
successful.
! End sign
TR-151A will send an SMS whose format is“?7,IMEI,OK!” to the return phone number to confirm
it has received the request.
Exit from parking mode:
Users can press the power button or send an SMS to exit from parking mode.
The format of SMS is following as:
?2,IMEI,Return_Phone_Number!