Globalsat Bluetooth GPS Receiver BT-368 User Manual Version 1.0 Globalsat Technology Corporation Headquarters (Far East Century Park) 16F., No. 186, Jian-Yi Road, Chung-Ho City, Taipei Hsien 235, Taiwan Tel: 886-2-8226-3799/ Fax: 886-2-8226-3899 E-mail : service@globalsat.com.tw Website: www.globalsat.com.
Table of Content 1. Product Information ................................................................................. 3 1.1 Product Description .......................................................................... 3 1.2 Product Features .............................................................................. 3 1.3 Product Specifications ....................................................................... 4 2. Hardware Description ............................................................
1. Product Information 1.1 Product Description BT-368 is a high performance Bluetooth GPS receiver. It uses SiRF StarIII chipset, which tracks up to 20 satellites simultaneously. With a high-performance built-in antenna, BT-368 ensures excellent signal reception. BT-368 takes advantage of the Bluetooth technology to offer hassle free installation. It connects wirelessly to your Bluetooth enabled PDA, laptop, or other devices.
1.3 Product Specifications GPS Receiver Chipset Frequency Code Protocol SiRF StarIII L1, 1575.42 MHz C/A Code NMEA 0183 v3.01 (Default: GGA,GSA,GSV,RMC Support: VTG,GLL,ZDA) and SiRF binary Available Baud Rate Channels Antenna Sensitivity Cold Start Warm Start Hot Start Reacquisition Accuracy Maximum Altitude Maximum Velocity Maximum Acceleration Update Rate DGPS 4800/9600/14400/19200/38400/57600/115200 20 Built-in Patch Antenna Acquisition:-146dBm, Tracking:-159dBm 42 seconds 38 seconds 1 second 0.
2. Hardware Description 2.
2.2 LED Behaviors Bluetooth LED (Blue) Status Blink once per three seconds Description Not linked Blink once per second Linked GPS LED (Green) Status Blink once per second Description Position fixed Steady on Position not fixed Power LED (Red/Orange) Status Red light steady on Description Battery low Off Battery good Orange light steady on Battery charging 2.
3.
4. Getting Start Step 1: Charging Battery Please charge the battery by the included charger till the orange LED goes off before using BT-368 for the first time. Step 2: Turn on the power Press and hold the power button for one second to turn on your BT-368. Step 3: Wait for GPS fixed Place your BT-368 in a place where it can see the sky directly and check the GPS LED. If the GPS LED starts blinking, your position is fixed.
Step 4: Connect to your Bluetooth-enabled devices Run the Bluetooth manager from your Bluetooth enabled device, search Bluetooth devices, select device (BT-368), and connect it to your BT-368. Once the Bluetooth LED is blinking once per second, the link is established successfully. If a passkey is asked, please enter “0000”. Step 5: Start Navigation Software Start the navigation software on your Bluetooth enabled device.
5. Troubleshooting 5.1 Connect BT-368 to a Pocket PC 1. Tap on [Start]. 2. Tap on [Settings]. 3. Tap on Bluetooth button. 4. Turn on Bluetooth function.
5. Tap on [New] button. 6. Select [Explore a Bluetooth device] item. 7. Tap on the [BT-GPS-xxxxxx] icon. 8. Select BT-GPS COM Port, and then tap [Next] button.
9. Tap on [Finish] button. 10. Tap and hold on BT-GPS button. 11. Select [Connect]. 12. The connection between BT-368 and your Pocket PC is established.
. You can start the navigation software or GPSinfo program to check the GPS positioning status. 5.2 Bluetooth is unable to be connected (1) Check if the Bluetooth status LED is flashing normally. (2) Check if the battery power is enough. If not, please recharge it. (3) Check if the other Bluetooth device is enabled or not. 5.3 GPS cannot be positioned (1) Check if the GPS status LED is flashing normally. (2) Check if the battery power is enough. If not, please recharge it.
FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
