Quick Start Guide

ManualsBrandsGlobalSat ManualsGPSGlobalSat TA-910

TA-910 Quick Start Manual

TA-910 Specification

Connection to OBDII:

SAE J1962 OBDII plug interface

CANBus Protocol:

o ISO 15765-4 (CAN)

o ISO 14230-4 (Keyword Protocol 2000)

o ISO 9141-2 (Asian, European, Chrysler vehicles)

o SAE J1850 VPW (GM vehicles)

o SAE J1850 PWM (Ford vehicles)

Connecting TA-910 to TR-600/TR-606:

- Connect TA-910 to the RS232 port of TR-600/TR-606

- Plug TA-910 onto the vehicle OBDII port.

Summary of content (4 pages)

PAGE 1
TA-910 Quick Start Manual TA-910 Specification Connection to OBDII: SAE J1962 OBDII plug interface ISO 15765-4 (CAN) o ISO 14230-4 (Keyword Protocol 2000) o ISO 9141-2 (Asian, European, Chrysler vehicles) CANBus Protocol: o SAE J1850 VPW (GM vehicles) o SAE J1850 PWM (Ford vehicles) o Connecting TA-910 to TR-600/TR-606: - Connect TA-910 to the RS232 port of TR-600/TR-606 - Plug TA-910 onto the vehicle OBDII port.
PAGE 2
TR-600/TR-606 Protocol setup for reading vehicle OBDII data: - New O3 report format codes added for interpreting OBDII data: Code z c d j k l p q Description Vehicle Identification Number (VIN) Vehicle speed Engine RPM Calculated engine load Engine coolant temperature Mass Air Flow (MAF) Throttle position Fuel level input Unit Text Km/h rpm % Celsius grams/sec % % Example : Enable OBDII data: (setting above O3 format codes for OBD data while disabling Cell ID reports O8=0 and add Cell ID codes to O3 form
PAGE 3
Resetting the device: - Once TA-910 is plugged in and TR-600/TR-606 report format is also properly configured, push the “RESET” button on TR-600/TR606 once to initiate OBDII protocol scan and connection. - TR-600/TR-606 is now capable of reading preset OBDII data from the vehicle.
PAGE 4
Report string containing OBD data according to the above O3 format: GSr,352964052270304,00,1,e000,3,030913,092026,E12129.2585,N2459. 7931,106,0.00,0,9,0.8,12020mV,1G1JC5444R7252367,193,5881,19,67,38 3,0,50*04 Note: It is possible that some vehicles may protect specific OBD data which renders it unavailable for TA-910 to interpret.