User's Manual

Quick Start Guide – GuruPlug Server page 8 / 10
G. Wi-Fi / Bluetooth
Both GuruPlug Server Standard and GuruPlug Server Plus have a built-in WiFi module which is compliance with
8.2.11 b/g/n standard and Bluetooth 3.0 + Enhanced data rate (EDR).
The WiFi works as both client and AP mode but only one at a time.
The default mode is AP mode every time when it powers on and can be switched to client mode manually by
entering the setup page, please follow the procedures below to set-up the functionalities for WIFi and Bluetooth.
1. Prepare a Bluetooth earphone and one computer installed with Wi-Fi lan card, here we use computer with
Windows XP operating system for example.
2. Go to “Network Connections”
3. Select “Wireless Network Connection”
4. Select “View Available Wireless Networks”
5. Choose name start with “plug2-uAP-xxxx”
xxxx are last digits of the MAC address