User's Manual

HUDGPS
User Manual
Rev.A00
19
GlobalTop Technology Inc.
16 Nan-ke 9
th
Rd Science-based Industrial Park, Tainan 741, Taiwan, R.O.C.
Tel:[phone] Fax:[phone] http://www.gtop-tech.com
email:[e-mail]
© Copyright 2006 GlobalTop Inc.
3.2 Configuration setup with PDA connection
Following will show how to configure the Bluetooth connection on PDA. It may be
different from other PDA models.
1) Power on your PDA and the Bluetooth host.
2) Power on HG-100. If the battery is ready, you should see 2 LEDs indicationǺthe
blue for Bluetooth blinks 3 times/sec. It means the Bluetooth module is activated
and waiting for connection. The red LED for GPS, means the GPS module is
activated and is inquiring GPS signal.
3) See the screen, click Bluetooth mark at bottom, and [Bluetooth Manager] as below:
4) If this is your first time to use Bluetooth GPS, click the Bluetooth mark at the bottom
as below: