User's Manual

Bluetooth GPS Receiver User Manual
-9-
5.2. Configuration setup with PC connection
Here is a sample to show you how to connect the Bluetooth GPS Receiver with your PC,
software install and basic function test.
1) First, select a PC with Bluetooth interface. Or you can purchase Bluetooth adapter for
your PC. Please contact with your PC’s sales about this.
2) Check your Bluetooth manager if there exist any configuration of Bluetooth Serial Port
Profile like this：
Note ： this sample is for your reference only. The screen may be various between
different models of Bluetooth manager software.
3) If not found, please create a Bluetooth serial port by yourself. The configuration should
be like this：
4) If there is already one, please check the content. Some Bluetooth device will enable the
secure connection. Please refer to the configuration as above to uncheck it.
5) Power on your GPS Receiver. If the battery is ready, you should see 2 LED light up: the
blue LED blink 3 times/sec means Bluetooth is activated and waiting for connection.
Another static Green LED shows the GPS module is started and is inquiring position
information.
Please uncheck the
secure connection
Name it as
you wish