User's Manual

Bluetooth GPS Receiver User Manual
-2-
Caution
Read before you start to use：
¾ Global position system (GPS) is obtained by American Ministry of National Defense,
and they got the full responsibility about the preciseness and the maintenance. Any
changes may cause the capacity and preciseness of GPS differed.
¾ If you use this device inside of buildings, tunnels, or any huge objects beside you, the
GPS signals might be cut-off or disturbed. Please do not consider that the receiver is
malfunction.
¾ The receiver operating temperature is located between -10℃~60℃.For safety and
lifetime of Li-ion battery usage, do not place this device over two hours with overheated
environment.
0、Quick Start
0.1 Inside the Package
Thank you for purchasing our GPS product, and wish you have the best experience in
using. Please open the package, and check if everything in the list exists once you got it.
Please tell our salesman if anything missing.
A. Basic package
1. G66 multi-purpose Bluetooth GPS Receiver x 1
2. Car charger x1
3. Manual CD-Rom x 1
0.2 Connect to your PC/PDA
A. Touch the power pad for 1 seconds, power on the Bluetooth GPS receiver.
B. Put the Bluetooth GPS receiver at proper place (open sky) for good GPS signal
reception.
C. Turn on the power of your navigation platform like PDA/Smartphone etc…
D. Search for Bluetooth device by your Bluetooth manager on your Host Platform
(laptop/PDA/Smart phone). Normally Pin code is not necessary. But some Bluetooth
embedded system force to enter pin code (password), please fill [0000] in such
case.
E. Connect G66 Bluetooth GPS Receiver and then make sure baud rate set at
38400bps(standard) in your application program.