User's Manual

Bluetooth GPS Receiver User Manual
-8-
Power On/Off LED display procedure
Symbol
Description
Power on
Press and hold Power sense switch (<1sec) to switch on the power
Power off
Press and hold Power sense switch (<3sec) to switch off the power
Power on
procedure of LED
First the receiver turns on ‘Red’、’Blue’、’Green’ LED for 0.5 sec
simultaneously, next the receiver turns all LED off simultaneously for
0.5 sec.
Finally the receiver turn on ‘Red’Æ’Blue’Æ’Green’ LED in sequence for
1 sec and turn off ‘Green’Æ’Blue’Æ’Red’ LED in sequence for 1 sec.
Then ‘Power on’ action is complete.
Power off
procedure of LED
In Power ‘ON’ state. To press and hold Power sense switch (<3sec).
The receiver turns on ‘Red’、’Blue’、’Green’ LED for 0.5 sec
simultaneously.
Next the receiver turns all LED off simultaneously.
Then ‘Power off’ action is complete.
Bluetooth Idle detect
When GPS receiver is not connect with the Bluetooth host for 5 minutes and shutdown
the GPS receiver.
Reset function
When System just crashed or in other state. Now to press the reset button and let GPS
receiver get back to initial state.