Wireless digital door chime User’s Guide After Sales Support Now you have purchased a Home Protector® product you can rest assured in the knowledge that as well as your 3 year parts and labour warranty you have the added peace of mind of dedicated helplines and web support. AFTER SALES SUPPORT UK / N.IRELAND HELPLINE NO 0800 328 6020 REP. IRELAND HELPLINE NO 00800 4467 5888 E-MAIL SUPPORT info@dariolondon.
Index 04-05 05 05 06 06-09 08 08-09 10-11 12 12-21 12 13 13-14 15 15 15-16 16 16-18 18-19 19-21 21-22 Index Introduction Packaging Disposal of the device Proper use Safety instructions General instructions Instructions for use Description of parts Scope of delivery Startup and installation Insert batteries in the receiver Insert battery in the transmitter Programme radio channel Select signal Selection of bell tone Set volume of the acoustic signal Installation of receiver and transmitter Permanent install
Introduction Introduction Congratulations on choosing to buy a Home Protector® product. Packaging By doing so you now have the assurance and peace of mind that comes with purchasing a product made by one of Europe’s leading manufacturers. Keep the packaging, if possible. If you do not wish to keep the packaging, please dispose of it in an environmentally friendly manner.
Proper use Safety instructions With the Wireless digital door chime, wireless transmission of a signal can take place from the transmitter to the receiver. After receiving the signal, the receiver will emit a visual and/or acoustic signal. The transmission of the signal takes place in the form of radio waves. “Visual contact” between the transmitter and the receiver is therefore not necessary. Safety instructions • • • • Before you start ...
Safety instructions Safety instructions General instructions 1. Read through these instructions carefully before using the device. 2. Keep this instructions manual. 3. The device is exclusively designed for private use. 4. Keep packaging material (e.g. film bag) out of reach of children. Instructions for use 1. O nly the functions described in these operating instructions may be carried out with the doorbell. 2.
Description of parts 6 Description of parts 5 7 8 4 15 9 3 14 10 2 16 1 17 11 12 13 18 Helpline No. UK/Northern Ireland 0800 328 6020 Rep. Ireland 00800 4467 5888 E-mail Support info@dariolondon.com Model Number: GT-RD-2R/GT-RD-1T 1. Transmitter 2. Battery compartment on the back (for 1 battery size 3LR50 (12 V), included in scope of delivery) 3. LED function control 4. Doorbell button 5. Receiver 6. Flash 7. Melody 8. Learn 9. Selection switch Flash Flash and ring Ring 10.
Scope of delivery • • • • • • • Startup and installation Insert the battery in the transmitter (1) Transmitter (GT-RD-1T) Receiver (GT-RD-2R) Base Batteries: 2 x AA/LR6 1.5V and 1 x 3LR50 12V Fastening material for wall mounting Paper strips for the name label Operating instructions 1. Remove the lid of the battery compartment (2), by pulling of the tabs (17). 2. Insert the battery size 3LR50 into the battery compartment.
Startup and installation Startup and installation − The receiver confirms reception by emitting a signal. Depending on the position of the selection switch (9), a light signal (6), a light signal (6) and an acoustic signal (12), or only an acoustic signal (12). 3. If you do not intend to permanently install the transmitter, close the battery compartment with the lid (14). NOTE: If you should determine that the Wireless digital door chime is not functioning normally, e.g.
• • Startup and installation Startup and installation Please note: If the signal of the receiver becomes too quiet/too weak, replace the batteries in the receiver. If the LED function control (3) of the transmitter does not illuminate at all, or only weakly, when pushing the button, replace the batteries in the transmitter. water pipes are laid under the plaster at the installation site. When drilling the holes, the risk exists of an electric shock or damage to the pipes.
Startup and installation Startup and installation NOTE: For permanent installation of the device, skilled handling of tools is necessary. If necessary, please contact an electrical engineer, if you have no tools or are not experienced in handling tools! Installation of the receiver For installation on plaster or brickwork: 1. Drill 30 mm deep (ø 5 mm) with an impact drill; 2. Insert wall plugs (S5) in the drill hole; 3.
Startup and installation Startup and installation 4. With suitable screws (countersunk screws, head diameter max. 7 mm) fasten the wall bracket for the transmitter (14). NOTE: Note the position of the rubber seal (16) when attaching the transmitter. In order to achieve a better seal on the battery compartment, the rubber seal can be painted with some silicone lubricant. 5. Push the transmitter onto the wall bracket.
Problem solving • • Storage The bell tone is continuously repeated: Check whether the bell button is stuck. Briefly remove the batteries from the device and carry out reprogramming. • • Cleaning • • lean the transmitter and receiver with a slightly C damp cloth and carefully dry off all damp residues. Do not use any abrasive or corrosive detergent for cleaning the transmitter or receiver. Otherwise the surface could be damaged or the electronic components could corrode. Helpline No.
Conformity declaration Warranty We declare that this product conforms to the basic requirements and other relevant regulations of the Directive 1999/5/EC. The complete conformity declaration can be found on the Internet at www.gt-support.de. Model: Wireless digital door chime GT-RD-2R/ GT-RD-1T The appliance has been manufactured with the greatest care. The warranty period is three years from the date of purchase.
Warranty Warranty This warranty does not apply in cases of damage caused by accident, improper use, abuse and force majeure. If the appliance has to be returned to us, it must be packed correctly as we cannot accept any responsibility for damage caused in transit. This warranty will be invalidated if the appliance is tampered with in any way whatsoever.
Wireless digital door chime 3 YEAR WARRANTY CARD Name________________________________________________ Address______________________________________________ ______________________________________________________ ______________________________________________________ Email_______________________ Tel No_______________ Model No.
