Owner's Manual

Page 17
Cleaning & Sanitizing
8. Remove the slice receiving tray (1). Loosen two
screws (1a) to release slice receiving surface (1)
from the retaining clips (1b) (Figure 17-2).
9. Wash the slice receiving tray (1) with warm water
and normal dishwasher detergent.
14
16
Figure 17-1
1
1a 1b 1
Figure 17-2
REINSTALL REMOVABLE PARTS
1. Reposition the product holder (4).
2. Place the product holder (4) complete with pusher
(3) on the carriage (5) (Figure 17-3).
4
5
Figure 17-3
34
54
Figure 17-4
3. Tighten knob (34) on product holder (4) to secure
product holder and pusher (3) to carriage (5)
(Figure 17-4).
7. Carefully insert the cloth between the knife (16)
and knife ring guard (14). While holding the cloth
between knife(16) and knife ring guard (14), work it
along the inside surface of ring guard (14). Repeat
this procedure as necessary (Figure 17-1).