Owner's Manual
Page 22
Inspections, Simple Maintenance, and Repair
SHARP KNIFE BLADE
TO AVOID SERIOUS PERSONAL INJURY:
• NEVER touch slicer before reading and completely understand everything in this instruction
manual. You must be at least 18 years old and have had proper training and authorization from your
supervisor.
• BEFORE CLEANING, SERVICING, OR REMOVING ANY PARTS always turn slice thickness knob
counter-clockwise to zero (0) until it stops.
• NEVER TOUCH KNIFE. Keep hands and arms away from all moving parts.
• DO NOT tamper with, bypass or remove any safety devices or guards.
• AFTER EACH USE, ALWAYS turn the slice thickness knob counter-clockwise to zero (0) until it stops.
• USE ONLY GLOBE PARTS AND ACCESSORIES properly installed.
INSPECTING THE SLICER
INSPECT THE SLICER FOR DAMAGED OR BROKEN PARTS. A thorough visual inspection should be made
of the entire slicer and its parts. Globe urges the owner/operator to inspect all components often and for an
authorized service agent to inspect the entire slicer at least every 6 months, including all parts that are detachable
for cleaning and sanitizing. This inspection should include looking for damaged parts and areas that may be more
difcult to clean and sanitize.
IF DAMAGE IS FOUND OR PARTS ARE MISSING, THE SLICER MUST BE REMOVED
FROM SERVICE UNTIL IT IS REPAIRED BY AN AUTHORIZED SERVICER.